Carbolite ABA 7/35B - Manual (Page 36)

36 MF60 – 1.04
The constituent elements of the PID control are also shown on the screen as Proportional,
Integral and Derivative.
10.2 Heater On / Off Control
The heater power can be switched on or off at any time using the red and blue buttons on the
right hand side of the screen. On system power up the on/off status of the heater power is
determined by an
‘Initial Heater Setting’ which is located on the ‘General Settings’ screen, (see
Screen-view :10.2.1). This is accessed via:
Home Screen → Main Menu → System Configuration → General Settings
The factory default for this setting is ‘off’. This ensures the furnace will not heat up after applying
power for the first time during installation and hence protects any items that may still be packed
inside the main chamber.
10.2.1 Screen-view: General Settings