Carbolite ABA 7/35B - Manual (Page 62)

62 MF60 – 1.04
22 Event Log Messages
Significant events that occur during operation are recorded with a time stamp in an event log
text file, which is stored in flash memory on the controller. A new event log file is created every
day the system is used. The file name has the following format:
ABA_Event_Logyyyy-mm-dd.txt
Where yyyy is the four digit year, mm is the two digit month and dd is the day of the month.
E.g. ABA_Event_Log2011-03-24
The number of files held on the system is limited to 100. Upon reaching this limit, the oldest file
will automatically be deleted.
The log files can be copied to a USB memory stick and opened on a PC using a text editor such
as Notepad. This information can be used as an aid to diagnosing problems or used to find out
when a change to the system configuration was made. Refer to section 16 for details on
copying files to a USB memory stick.
The possible events that are written to the log file are:

Power up

Supervisor access level set

Operator access level set

Configuration access level code changed

Supervisor access level code changed

Tare balance command

Calibrate balance command

Cancel calibrate command

New weights entered:
o Tray Weight = xxx.x
o Combined Weight = xxx.x
o Sample Weight = xxx.x

Save recipe: overwriting existing recipe

Overwriting existing recipe with

Copying recipe to new recipe

Deleted recipe:

Fan lift calculation complete:
o Fan lift = x.xg

Error initialising I/O Board comms. Code: xx

Error setting I/O Board initial values. Code: xx

Error communicating with I/O Board. Code: xx

Voltage setting changed to xx