Carbolite ABA 7/35B - Manual (Page 13)

13 MF60 – 1.04
Open the door lock with the key provided.
Insert the balance pan extension into the
main chamber with the extension legs fitting
through the four holes in the chamber hearth
(Fig- 3.7.8 to 3.7.9). Note that the front edge
of the extension is folded down.
Fasten the balance pan extension to the
balance using the four screws and Allen key
supplied (see Fig- 0 to 3.7.11).
Adjust the balance position so that the balance pan extension legs pass centrally through the
holes in the chamber floor (see Fig 3.7.12); this can be seen from the balance side access
panel (see Fig - 3.7.6).First Loosen the four screws that hold the balance location plate position
balance as described above, once in position re-tighten then tighten the four screws (see Fig
3.7.6).
3.7.12 Fig – Checking that the balance pan
legs are central