Atop Technology SE8502-M12 User Manual - Manual (Page 54)

User manual Version 1.1
SE8502-M12 IP68 Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved
50
B3.4 Configuration
This function is applied to the configuring, import and export of work parameters for any network device, and here are
mainly supplied with: ‘Network …’, ‘COM Port…’, ‘Locate’, ‘Reset’, ‘Erase Flash’, ‘Import Setting…’, ‘Export
Setting…’, ‘Virtual COM…’, ‘Configure by IE’ and ‘Options’, and some other application functions. The user can
carry out a configuration operating through menu or by clicking the corresponded button on the toolbar, shown as the
figure below:
A3.4.1 Network …
The user can modify the IP address of any selected device, shown as the figure below:
Network … Locate