Atop Technology SE8502-M12 User Manual User Manual

Page 39

Text mode
Original mode

User manual Version 1.1
SE8502-M12 IP68 Serial Server

Fig 51. Enable Virtual COM mode by Telnet

Running Serial to IP for program on PC

On Window Start Menu, go to\program\Serial/IP\Control panel\, The “Serial to IP for Control Panel” window shall
appear. Then select the serial port.

Fig 52. Detail setting from Serial/IP

On the right of the panel is a sample

for COM 4 settings

. On the left is the list of the COM ports that have been

selected (on Select Ports window) for use by the

Virtual COM

Redirector. Change the list by clicking the Select

Ports button.

Each COM port has its own settings. When click on a COM port, the Control Panel changes to reflect that the
selected port.

Note: COM port changes become effective immediately.

Configure Virtual COM Ports

Serial/IP COM port can be changed as follows: