Lan settings, Dns settings, Snmp settings – Atop Technology SE8502-M12 User Manual User Manual
Page 19
User manual Version 1.1
SE8502-M12 IP68 Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved
15
3.3.1.
LAN Settings
Operation: [Network] Æ [LAN Setting]
Click on the “Network” link and the following screen shall appear. Fill in IP information on TCP/IP field.
Alternatively, click on DHCP to automatically obtain IP address, gateway and subnet mask information.
Fig 18. LAN Setting from Network web page
3.3.2.
DNS Settings
Operation: [Network] Æ [DNS Settings]
Click on the “Network” link and the following screen shall appear. Fill in DNS information on DNS Settings field.
Alternatively, User can configure DNS by checking on “Obtain an IP automatically” field in LAN Settings or
WLAN Settings fields to automatically obtain DNS from DHCP server.
Fig 19. DNS Setting from Network web page
3.3.3.
SNMP Settings
Operation: [Network] Æ [SNMP Settings]
Click on the “Network” link and the following screen shall appear. Check on “Enabling Settings” field. Fill in desired
SysName、 SysLocation、 SysContact information on SNMP Settings fields. The changes of SNMP Settings will
take effect only after the SE8502-M12 restarted.