Networking configuration, Etworking, Onfiguration – Atop Technology SE8502-M12 User Manual User Manual

Page 28

User manual Version 1.1
SE8502-M12 IP68 Serial Server

Serial Information:

UART mode RS485/RS232/RS422

Link Mode: TCP Server [or TCP Client/UDP Mode, Allows for changes in Serial Page]
Baud rate: 110/150/300/600/1200/2400/4800/9600/19200/38400/57600/115200/230400/460800/921600
Parity: None [or Even/Odd/Space/Mark...Allows for changes in Serial Page]
Data bits: 5, 6, 7, 8 bits
Stop bits 1 bit or 2 bits
Flow Control None, Xon/Xoff, RTS/CTS

4.2. Networking Configuration

Operation: [Main]Æ[2 Networking]:

Select “2” on “Input choice (0~6) and enter:” to enter Networking settings page.

Fig 34. Networking Settings by Telnet

Note: Press “0” key to return to the previous menu

This section allows for changes in IP address, subnet mask, gateway IP address and SNMP information. Please
note that setting changes will not take effect until the SE8502-M12 is restarted.