Atop Technology SE8502-M12 User Manual - Manual (Page 23)

User manual Version 1.1
SE8502-M12 IP68 Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved
19
„ Configure UART Mode: RS-232 or RS-485 or RS-422
„ Baud rate: 110/150/300/600/1200/2400/4800/9600/19200/38400/57600/115200/230400/460800/921600
„ Parity: None or Odd or Even or Mark or Space
„ Data bits: 5, 6, 7, 8 bits
„ Stop bits: 1 or 2
„ Flow control: None or Xon/Xoff or Hardware (RTS/CTS).
Fig 25. Serial Communication Settings from Web Page
3.4.6.
Delimiter Settings
Packet delimiter
Packet delimiter is a way of controlling the number of packets in a serial communication. It is designed to keep
packets in track. SE8502-M12 provides two ways in parameter setting: (1) Packet delimiter by timer and (2) packet
delimiter by Character pattern. By default, packet delimiter timer is 1 ms. the range of packet delimiter timer is 1 to
30,000 msec. For Character pattern terminator, if “character pattern is selected and a data stream ended with “0x0a04”,
then the entire data buffer of the serial device is transmitted.
User can also choose character pattern as the packet delimiter indicated.
3.5. Configure System
There are five subsystems for system settings, included Time, WLAN Region, Security, Set to default and Restart.
Fig 26. Subsystem menu of system settings Web Interface