Atop Technology SE8502-M12 User Manual - Manual (Page 26)

User manual Version 1.1
SE8502-M12 IP68 Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved
22
4. Telnet Configuration
User can also use Telnet utility to change SE8502-M12 configuration settings.
„ Open Ms-DOS command prompt window or other telnet tools
„ Enter the “IP address” of the SE8502-M12 (For example, Telnet 10.0.50.100). The system then prompts for
username and password, the default username is “admin” and the default password is null (blank).
Fig 31. Login into System by Telnet
Then the following main menu shall appear
Fig 32. Overview information by telnet
„ If the SE8502-M12 does not receive any command within 1 minute, Telnet will be terminated
automatically.
„ The changes of networking parameters will take effect only after the SE8502-M12 is restarted.