Lan settings, Dns settings – Atop Technology SE8502-M12 User Manual User Manual

Page 29

User manual Version 1.1
SE8502-M12 IP68 Serial Server

4.2.1.

LAN Settings

Operation: [Main]Æ[2 Networking]Æ[1 LAN Settings]

Select “1” from “Input choice (0~3) and enter on Networking page:” to enter LAN Settings page. The MAC
address, IP address, subnet mask, gateway address, and IP mode information will be shown (Fig. 42). User also
can set IP, Netmask, Gateway, and IP mode of LAN interfaces by enter the corresponding menus and values. For
example, enter 1 for setting the IP address on LAN interface.

Fig 35. LAN Settings by Telnet

4.2.2.

DNS Settings

Operation: [Main]Æ[2 Networking]Æ[2 DNS Settings]

Select “2” from “Input choice (0~3) and enter on Networking page:” to enter DNS Settings page.

Fill in the DNS information DNS1 or DNS2 or both according to user DNS server (Fig. 43).

Fig 36. DNS Settings by Telnet