Atop Technology SE8502-M12 User Manual - Manual (Page 27)

User manual Version 1.1
SE8502-M12 IP68 Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved
23
4.1. General Information
Operation: [Main]Æ[1 Overview]
Select “1” from “Input choice (0~6) and enter:” to enter “overview page.
This system overview window gives the general information on LAN IP, MAC address, SNMP information, kernel
and AP version, and the connection status of the SE8502-M12 (Fig. 39).
The following overview information shall appear.
Device Information:
Kernel Version: [Read Only, Generated by system]
AP Version: [Read Only, Generated by system]
Ethernet Information:
MAC: [Read Only]
IP: [Allows for changes in Network Page]
Fig 33. System Information from Overview
DNS Information:
DNS1: [IP address of 1
st DNS Server, Allows for changes in Auto IP of Networking Page]
DNS2: [IP address of 2 nd DNS Server, Allows for changes in Auto IP of Networking Page]
SNMP Information:
SNMP Status: Enable [or Disable, Allows for changes in Networking Page]
SysName: [Allows for changes in Networking Page]
SysLocation: [Allows for changes in Networking Page]
SysContact: Allows for changes in Networking Page]