Tcp client for link mode, Udp for link mode – Atop Technology SE8502-M12 User Manual User Manual

Page 32

Text mode
Original mode

User manual Version 1.1
SE8502-M12 IP68 Serial Server

Fig 40. TCP Server mode in link mode

Note: Enable Virtual COM mode if the remote site PC’s “Serial to IP” tool is installed.

4.3.2.

TCP Client for Link Mode

Operation: [Main] Æ [4 Serial Settings] Æ [1 Link mode] Æ [2 TCP Client]

User can configure SE8502-M12 to work in TCP Client mode. On destination IP & port (default:
COM1:4660/COM2:4661), Enter the desired destination IP and port (Server IP and port) that SE8502-M12 want to
connect to (For example, another SE8502-M12, or PC for data-collection). The SE8502-M12 can support two
destination host computers simultaneously. Fig. 60 is the TCP Client page.

Fig 41. TCP Client mode in link mode

4.3.3.

UDP for Link Mode