Com port configuration, Link mode settings, Onfiguration – Atop Technology SE8502-M12 User Manual User Manual
Page 20
User manual Version 1.1
SE8502-M12 IP68 Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved
16
Fig 20. SNMP Setting from Network web page
3.4. COM
Port
Configuration
Here User can configure Serial parameters, include alias, baud rate, parity, data bit and type of flow control defined
by user.
Fig 21. COM port Information Web Page
3.4.1.
Link Mode Settings
Click on the “Serial” link and the Fig. 27 screen will appear.
Fill in Serial parameter information on Serial Settings field
Click on “Save Configuration” button to save the changes.