Atop Technology SE8502-M12 User Manual - Manual (Page 25)

User manual Version 1.1
SE8502-M12 IP68 Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved
21
Fig 28. Change password from System Security Page
” Note: User may press the default reset key to reset password to the default value(blank)
3.5.3. Restoring Factory Default Configurations
Operation: SystemÆ Set to Default
User can click on “set to default and restart” button to restore SE8502-M12’s settings to factory default (Fig.
29).
Fig 29. Set all parameters to factory default by Web Interface
3.5.4. Restart System
Operation: SystemÆ Restart
The changes of networking parameters will take effect only after the SE8502-M12 is restarted. User can restart
the SE8502-M12 manually by click on Restart button on the restart menu web page (Fig 30).
Fig 30. Restart system by Web