Brother MFC 9200C - Manual (Page 93)

M A K I N G C O P I E S 10 - 9
Paper Type
1
Press Function , 3 , 1 .
2
Press or to select the type of
paper and press Set .
• If you use Brother coated paper for 720
dpi (BP72CL), select INK JET, then
select BROTHER.
• If you use non-Brother ink jet paper,
select INK JET, then select OTHER.
3
When the LCD shows the type of
INK JET paper, press
Set . If you did
not select INK JET, skip to Step 4.
4
Press Stop to exit.
Copy Quality
1
Press Function , 3 , 2 .
2
Press or to select the copy
quality and press Set .
3
Press Stop to exit.
Color Adjustment
1
Press Function , 3 , 3 .
2
Press or to select RED,
GREEN, or BLUE and press Set .
3
Press or to adjust the degree of
color and press Set .
4
Return to Step 2 to select the next color
—OR—Press
Stop to exit.
Note
The MFC ejects paper with printed surfaces face up onto the paper tray in the
front of the MFC. When you use transparencies, remove each sheet
immediately, to prevent a paper jam or curled sheets.
1 . P A P E R T Y P E
P A P E R : P L A I N
P A P E R : I N K J E T
P A P E R : G L O S S Y
P A P E R : P H O T O
P A P E R : T R N S P R N C Y
2 . Q U A L I T Y
Q U A L I T Y : N O R M A L
Q U A L I T Y : P H O T O
Q U A L I T Y : H I G H
Q U A L I T Y : D R A F T
3 . C O L O R A D J U S T
R : – +
Light Dark
B : – +
G : – +