Brother MFC 9200C - Manual (Page 73)

A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S 7 - 2
Storing Speed Dial Numbers
You can store Speed Dial numbers, so you can dial by pressing only four keys
(and
Start ). The MFC has 100 Speed Dial locations.
1
Press Function , 1 , 5 , 2 .
2
Use the dial pad to enter a two-digit
location (00-99) and press
Set .
3
Enter the number (up to 20 digits)
and press
Set .
4
Use the dial pad to enter the name (up to
15 characters) and press
Set . You can
use the chart on page 4-2 to help you
enter letters—OR—Press
Set and go to Step 6 to store the number without a
name.
5
Press or to select the type of number and press Set .
6
Return to Step 2 to store another Speed Dial number—OR—Press Stop to exit.
Changing One Touch and Speed Dial Numbers
If you try to store a One Touch or Speed Dial number in a location where a
number is already stored, the LCD shows the current name stored there, then
prompts you to either
1. CHANGE—OR—2. EXIT.
1
Press 1 to change the number stored, or press 2 to exit without making a change.
2
Enter a new number and press Set .
• If you want to erase the whole number, press Stop when the cursor is to
the left of the digits. The letters above and to the right of the cursor will
be deleted.
• If you want to change a digit, use or to position the cursor under
the digit you want to change, then type over it.
3
Follow the directions beginning at Step 4 in Storing One Touch Numbers and
Storing Speed Dial Numbers.
Note
If you need to store a pause longer than 3.5 seconds, press Redial/Pause two
or more times.
FAX A fax number
TEL A telephone (voice) number
FAX/TEL Both a fax and telephone number
Even if you lose electrical power, numbers stored in memory will not be lost.
S P E E D - D I A L ? #
# 0 5 :
E N T E R & S E T
N A M E :