Brother MFC 9200C - Manual (Page 64)

6 - 4 S E T U P S E N D
Manual Transmission (With an External Telephone)
Manual transmission lets you hear the dial tone, ringing and fax receiving tones
before sending the fax.
1
Place the original face up in the ADF, or face down on the scanner glass.
2
Pick up the handset of the external phone and listen for a dial tone.
3
Enter the fax number you want to call. (You can enter the digits using the dial
pad, One Touch, Speed Dial or Search). (See One Touch Dialing, page 7-4.)
4
When you hear the fax tone, press Start .
5
Replace the handset of the external phone.
Automatic Transmission
This is the easiest way to send a fax.
1
Place the original face up in the ADF, or face down on the scanner glass.
2
Enter the fax number using the dial pad, One Touch, Speed Dial or Search.
(See Speed Dialing, page 7-4.)
3
Press Start .
Color Fax transmission
Your Multi-Function Center allows you to transmit a color fax.
1
Place the original face up in the ADF, or face down on the scanner glass.
2
Press Fax Resolution to select the Color Fax.
3
Enter the fax number using the dial pad, One Touch, Speed Dial or Search.
4
Press Start .
Manual and Automatic Fax Redial
If you’re sending a fax manually and the line is busy, press Redial/Pause to
redial the number.
1
Press Redial/Pause .
2
Press Start .
If you’re sending a fax automatically and the line is busy, the MFC will
automatically redial up to three times at 5 minute intervals.
When you send a color fax, the MFC starts sending the fax without scanning
the original into memory.