Using a usb cable to connect the mfc to the pc, Using windows, 98, 98se, me and windows – Brother MFC 9200C User Manual

Page 129: Professional only) -17, 2000 professional only)

S E T T I N G U P T H E M F C A N D P C T O W O R K T O G E T H E R

13 - 17

Click OK.

All the drivers have been installed. Now you can print and scan.

Using a USB Cable to Connect the MFC to the
PC (Using Windows

98, 98SE, ME and

Windows

2000 Professional Only)

After you have set up the MFC and checked that it is working properly, make
sure that your PC is turned off.

Connect the USB
cable to both the MFC
and the PC.

Turn on your PC.

Note

If you want to install PaperPort

, MFL Pro, go to the CD section.

(See Installing the Brother Software, page 13-27.)

IMPORTANT

To install the software using Windows

2000 Professional, you must be

logged on as the Administrator.

Note

Before you can connect the MFC to your computer, you must purchase a USB
cable that is no longer than 6 feet (1.8 meters).

Note

If you are using a bi-directional IEEE-1284 compliant parallel cable, see Using
a bi-directional IEEE-1284 compliant parallel cable to Connect the MFC to
the PC, page 13-2.

Note

Please follow the instructions for the operating system you are using.

Note

Now begin the installation of the Brother Drivers:

■

If you are using Windows

98, 98SE, ME, go to Step 4.

■

If you are using Windows

2000 Professional, go to page 13-24.