Brother MFC 9200C - Manual (Page 77)

A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S 7 - 6
Search
You can search for names you have stored in One Touch and Speed Dial
memories. Names are stored alphabetically. (See
Storing One Touch Dial
Numbers , page 7-1 and Storing Speed Dial Numbers , page 7-2.)
1
Place the original face up in the ADF, or face down on the scanner glass.
2
Press Search/Speed Dial , then enter the first letter of the name you’re
looking for.
3
Press or to search the memory.
4
Press Start , when the LCD shows the name you want to call.
Pause
Press Redial/Pause to insert a 3.5 second pause between numbers. If you are
dialing overseas, you can press Redial/Pause as many times as needed to
increase the length of the pause.
Fax Redial
If you’re sending a fax manually and the line is busy, press Redial/Pause to
retry the number.
1
Press Redial/Pause .
2
Press Start .
If you’re sending a fax automatically and the line is busy, the MFC will redial
automatically up to three times, at 5 minute intervals.
Tone/Pulse (For Canada only)
If you have Pulse dialing service, but need to send tone signals (for example, for
telephone banking), follow the directions below. If you have Touch Tone
service, you will not need this feature to send tone signals.
1
Lift the handset of an external phone.
2
Press # . Any digits dialed after this send tone signals.
3
When you hang up, the MFC returns to pulse dialing service.