Brother MFC 9200C - Manual (Page 92)

10 - 8 M A K I N G C O P I E S
Changing Default Copy Settings
Press Function , 3 to change default settings for Copy mode. These settings
will remain until you change them again by pressing Function . Adjust the
colors using the Color Adjustment, Brightness, and Contrast settings.
By pressing a number, you can adjust copy settings as shown in the following
chart. Press
or to scroll through the options for each setting. Press Set
to save your selection. Press Stop to exit—OR—Press to select the next
setting you want to change.
Press Function and 3 :
1.PAPER TYPE PAPER:PLAIN
QUALITY:HIGH
PAPER:INK JET
PAPER:GLOSSY
PAPER:PHOTO
PAPER:TRNSPRNCY
INK JET:BROTHER
INK JET:OTHER
QUALITY:PHOTO
QUALITY:DRAFT
COLOR:RED
COLOR:GREEN
COLOR:BLUE
R: – +
2.QUALITY
3.COLOR ADJUST
4.CONTRAST
5.ONE COLOR
– +
B: – +
G: – +
COLOR:OFF
COLOR:CYAN
COLOR:MAGENTA
COLOR:YELLOW
is default
QUALITY:NORMAL