JLG 460SJ ANSI Service Manual - Manual (Page 28)

SECTION 1 - SPECIFICATIONS
1-8 – JLG Lift – 3120788
2. Wheel Bearings (2WD Only)
Lube Point(s) - Repack
Capacity - A/R
Lube - MPG
Interval - Every 2 years or 1200 hours of operation
3. Wheel Drive Hub
Lube Point(s) - Level/Fill Plug
Capacity - 17 oz. (0.5 L) - 1/2 Full
Lube - EPGL
Interval - Check level every 3 months or 150 hrs of
operation; change every 2 years or 1200 hours of
operation
4. Hydraulic Return Filter
Interval - Change after first 50 hrs. and every 6
months or 300 hrs. thereafter or whenever Charge
Filter is replaced.
5. Hydraulic Charge Filter
Interval - Change after first 50 hrs. and every 6
months or 300 hrs. thereafter or as indicated by
Condition Indicator.
6. Hydraulic Tank
Lube Point(s) - Fill Cap
Capacity - 40.0 gal. tank (151L) 52.0 gal. system
(196.8L)
Lube - HO
Interval - Check Level daily; Change every 2 years or
1200 hours of operation.
7. Suction Strainers
Lube Point(s) - 2
Interval - Every 2 years or 1200 hours of operation,
remove and clean at time of hydraulic oil change.
8. Oil Change w/Filter - Ford
Lube Point(s) - Fill Cap/Spin-on Element (JLG P/N
7014501)
Capacity - 4.5 Quarts
Lube - EO
Interval - 3 Months or 150 hours of operation
Comments - Check level daily/Change in accor-
dance with engine manual.
9. Oil Change w/Filter - Deutz
Lube Point(s) - Fill Cap/Spin-on Element (JLG P/N
7016331)
Capacity - 6.3 qt. (5.9) engine
Lube - EO
Interval - Every Year or 1200 hours of operation
Comments - Check level daily/Change in accor-
dance with engine manual. Refer to Figure 1-3.,
Deutz Engine Dipstick.