Apple Power Macintosh 4400 - Manual (Page 164)

3 Push down on the DIMM until it snaps into place.
The ejector automatically closes.
4 Repeat steps 1–3 if you have other DRAM DIMMs to install.
5 If you have a video DIMM or cache DIMM to install, proceed to “Installing a Video DIMM”
or “Installing a Cache DIMM.” If you are finished installing items in your computer,
proceed to the section “Closing the Computer,” later in this chapter.
Installing a video DIMM
This section describes how to install a video DIMM.
1 Align the notches in the video DIMM with the small ribs inside the module slot, and insert
the module into the slot, as the following picture illustrates.
IMPORTANT Do not touch the module’s connectors. Handle the module only by
the edges.
164 Chapter 10