Apple Power Macintosh 4400 User Manual
Page 119
To return to the Macintosh desktop, choose Shut Down from the Special
menu. When your computer is off, restart the computer, then press the
Open/Close button of your CD-ROM drive to open the tray. Remove the
CD-ROM disc. Close the tray. Then start up your computer again.
To avoid having the computer start up from a CD-ROM disc, remember to
remove any disc in the drive before you shut down your computer.
You can’t eject a floppy disk.
For instructions on ejecting any disk (a floppy disk, a CD-ROM disc, or a
removable media disk), see the “Disks” topic area of Macintosh Guide,
available in the Guide (h) menu. If you can’t eject a floppy disk in the usual
ways (by selecting the disk’s icon and choosing Eject Disk from the Special
menu or by dragging the disk’s icon to the Trash), try the following in order:
m Hold down the x and Shift keys and press the number 1 key on your
keyboard to eject a disk in the internal disk drive.
m Turn off the computer. If the disk isn’t ejected, then hold down the button
on your mouse or other pointing device while you turn the computer
on again.
m Locate the small hole near the disk drive’s opening, and carefully insert the
end of a large straightened paper clip into it. Push gently until the disk is
ejected. Do not use excessive force.
If none of these solutions works, take the computer or disk drive to your
Apple-authorized service provider to have the disk removed.
For instructions on ejecting any disk (a floppy disk, a CD-ROM disc, or a
removable media disk), see the “Disks” topic area of Macintosh Guide,
available in the Guide (h) menu.
Emergency ejection hole
119
Troubleshooting