Apple Power Macintosh 4400 - Manual (Page 16)

16 Chapter 1
What’s next?
Congratulations! You’ve finished setting up your computer. Now continue
with one of the following steps:
m If you are new to the Macintosh, see the next section, “Learning the Basics.”
m If you are an experienced Macintosh user, turn to Chapter 2, “Getting
Help,” to learn about Macintosh Guide (or Mac OS Guide). Or select
Macintosh Guide from the Guide menu (h) in the upper-right corner of
your screen and explore it yourself.
m If you want to connect other equipment, such as a printer, to your computer,
see Chapter 3, “Connecting Equipment and Expanding Your Computer.”
m If you want to install application software on your computer, see
Chapter 4, “Installing and Using Application Programs.” The chapter
contains information on setting up your programs and managing memory.
You need this information to set up any programs specifically designed for
computers with PowerPC microprocessors.
m If you want to turn off your computer, see “Turning the Computer Off”
later in this chapter.
IMPORTANT If you need to turn off your computer at any point, please see
“Turning the Computer Off” later in this chapter. It is very important to use
the correct procedure for shutting down your Macintosh before turning it off.
Before you begin working with your computer, be sure to read the important
health and safety information in Appendix A.
What you can’t find in
this manual you can find
in Macintosh Guide (or
Mac OS Guide), your
main source of
information when
working with your
computer.