Apple IIe Card - Manual (Page 83)

7. Click Restart IIe.
Your changes don’t go into effect until you restart the Apple IIe.
Your cards are now installed. However, some of the cards you’ve installed
may not work until you adjust some of their settings, as explained in the
next section.
Some cards have settings you can adjust. The two Serial Cards require
special attention: They won’t work until you declare what sort of device
is connected to them.
This chapter does not explain how to adjust the settings. That
information is available in great detail in Chapter 5, “Reference.” ( You can
use the index or table of contents to find the exact page numbers.)
However, the following table lists the ten cards you might have installed
and describes how you can adjust each one of them (if at all). In most
cases, you make the adjustments in the Option Panel.
Setting the options
for your cards
Chapter 4: Setting Up Cards and Slots 67