Apple IIe Card - Manual (Page 195)

How you install the Apple IIe Card software determines how you start up
the Macintosh. Check the box that describes how you installed the
software. (The installation instructions are in Chapter 2 of the
Apple IIe
Card Owner’s Guide.)
■ n ■ n
Floppy Disk Startup
1. Turn off the Macintosh LC.
2. Insert your copy of the
IIe Startup Disk.
3. Turn on the Macintosh LC.
4. Find and double-click the IIe Startup icon.
■ n ■ n Hard Disk Startup
1. Turn on the Macintosh LC.
2. Find and double-click the IIe Startup icon.
To make certain changes to your Apple IIe environment or to return to
the Macintosh environment, you must open the Option Panel.
When you’re in the Apple IIe environment, you open the Option Panel
by pressing these three keys at the same time:
To perform a “cold reset” of your Apple IIe, press these three keys at the
same time:
(If you press these keys while in the Option Panel, you will reset the
Macintosh, not the Apple IIe Card.)
ctrl
Resetting the
Apple IIe Card
ctrl esc
Opening the
Option Panel
Startup Method
Apple IIe Card Quick Reference