Apple IIe Card - Manual (Page 39)

Before you begin: Make sure the hard disk is still connected to your
Apple IIe.
1. Turn on the hard disk and your Apple IIe.
2. Copy all the files on the hard disk to some other place.
You can copy the files to a series of floppy disks or to a file server.
3. Turn off your Apple IIe and the hard disk.
4. Make sure your Macintosh LC is turned off.
5. Connect the hard disk to your Macintosh LC.
If you have another SCSI device connected to your Macintosh LC, see
the manuals that came with your hard disk or your Macintosh for
detailed information on connecting several SCSI devices in a chain.
6. Plug in the hard disk, then turn it on.
7. Initialize the hard disk using Apple HD SC Setup.
You can find complete instructions for preparing the hard disk using
Apple HD SC Setup in the manuals that came with your Macintosh or
with the hard disk.
8. If you like, you can copy the files you backed up in step 2 onto
your hard disk, provided you created an Apple IIe partition, as
described earlier in this chapter.
Chapter 1: Preparing the Equipment 23