Apple IIe Card - Manual (Page 120)

To change the settings, follow these steps:
1. To open the Option Panel, press Control-
x-Esc.
The Option Panel appears, with the General Controls panel displayed.
2. Scroll if necessary to locate the Serial Card icon representing
the port your device is plugged into.
If the device you want to configure is plugged into the modem port,
click the modem port icon; if the device is plugged into the printer
port, click the printer port icon. Remember, if the device is a printer,
you should be using the Printer Card,
not a Serial Card.
❖ Warning message? If you get a message telling you the Serial Card
is not installed, you can continue with this section, but changing the
settings will not have any effect until you install the Serial Card in an
active slot, as explained in “Changing the Slot Settings,” later in this
chapter.
❖
Chapter 5: Reference 104
Serial Card icons Select
a device
here.