Apple IIe Card - Manual (Page 43)

To use your Apple IIe Card, you must have certain files on your Macintosh
startup disk. (A startup disk is any disk—either a hard disk or a 3.5-inch
floppy disk—that contains a System Folder.)
This section explains how to install the new Apple IIe Card software on
your startup disk and how to create a new startup disk, if necessary.
If you have a hard disk, use it as your Apple IIe Card startup disk. This
section explains how.
Once you finish this section, it’s important to remember that you
installed the software on your hard disk. Many tasks in this book will have
special notes for
hard disk startup people. When you see one of these
notes, remember that it applies to you.
❖ Note for people who partitioned their hard disk in Chapter 1:
This installation procedure installs the Apple IIe Card software
on the Macintosh partition of your hard disk.
❖
Before you begin: If your computer is off, turn it on. If your computer
is on, quit any programs you are running.
1. Insert the IIe Installer Disk into the built-in disk drive and
double-click its icon.
The disk’s window opens.
2. Open the Installer program by double-clicking its icon.
After a moment, information about the Installer appears on
your screen.
continues
>
If you have a hard disk
Preparing the
startup disk for
your Apple IIe Card
Chapter 2: Preparing the Software 27
Double-click to open
the Installer program.