Connecting the unidisk 3.5 drive – Apple IIe Card User Manual

Page 31

Follow these steps to connect a UniDisk 3.5 Drive to the Macintosh LC:

▲

Warning: Before connecting anything to your computer, make sure the
power cord is plugged

in and the power is turned off. The power cord

acts as a ground for your computer, protecting you from electrical shock,
even when the computer is turned off.

▲

1. Plug the Y-shaped cable into the Apple IIe port on the

computer’s back panel, as shown in the figure.

The Y-shaped cable comes with the other Apple IIe Card materials.

Be sure the connectors line up correctly. Tighten the connector
screws to ensure a proper fit.

continues

Connecting the

UniDisk 3.5 Drive

Chapter 1: Preparing the Equipment