Apple IIe Card - Manual (Page 48)

Setting up the printer software
If you don’t have a printer, skip this section. If you do have a printer,
follow these steps to set up your printer software:
1. Shut down your Macintosh.
If your Macintosh is on, quit any programs you might be running,
then choose Shut Down from the Special menu.
2. Insert your copy of the IIe Startup Disk into the built-in
floppy disk drive.
3. Turn on the computer and the monitor.
If you see a Restart button on the screen, click it.
The computer starts up.
4. Select the Chooser from the Apple menu.
After a moment, the Chooser window appears.
Chapter 2: Preparing the Software 32