Apple IIe Card - Manual (Page 150)

The settings I make in the Option Panel don’t take effect
■
Make sure the settings you’ve made in the Option Panel apply to cards
installed in active slots. If the cards are not in active slots, reassign
them to active slots.
■
Click the Restart IIe button to restart the Apple IIe Card. (Be sure to
save your work on a floppy disk before restarting.)
The settings don’t work after I connect a new device
■
Connecting a new device to your Apple IIe can cause all the Option
Panel settings to change. Open the Option Panel and change them
back again.
IIe Startup tells me there’s not enough memory for the Memory
Expansion Card
■
Increase the current memory size for the IIe Startup program. In the
Macintosh environment, select the IIe Startup icon, choose Get Info
from the File menu, and check the current memory size. To calculate
the correct memory size, take the number you want to put in the
Memory Card and add 350 to it. (See “Changing the Memory
Expansion Card Size” in Chapter 5 for instructions.)
■
Quit any Macintosh programs you are running.
■
Open the Option Panel and reduce the size allocated to the Memory
Expansion Card.
Problems with IIe Startup
Appendix A: Troubleshooting 134