Apple IIe Card - Manual (Page 152)

I can’t start up my Apple IIe program
■
Make sure the disk you’re using is the correct program disk.
■
Make sure the Apple IIe disk you want to start up from is an Apple IIe
startup disk. The disk should contain the appropriate operating
system files to allow the program to start. (See the manual that came
with the program you want to run for more information.)
■
Make sure you’ve set the startup slot correctly in the Slots portion of
the Option Panel.
■
Check the SmartPort portion of the Option Panel to make sure you
have the disk drives in the correct slots.
I can’t start up my Apple IIe program by double-clicking its
Macintosh icon
■
If you’re a floppy disk startup person, make sure you started up your
computer from the
IIe Startup Disk.
■
If you’re a hard disk startup person, make sure that you installed the
Apple IIe Card software according to the instructions in Chapter 2.
■
Make sure the Apple IIe program is either on a ProDOS floppy disk or
on the Apple IIe partition of your hard disk.
■
Try starting up the program from the Apple IIe environment instead.
Problems starting up
an Apple IIe program
Appendix A: Troubleshooting 136