Apple IIe Card - Manual (Page 36)

You may have an Apple IIe device—such as a joystick or hand
controls—that you’d like to use with the Macintosh LC. (Note: The only
joystick supported by the Apple IIe Card is the one with 9 pins in the
connector.) Follow these instructions:
▲
Warning: Before connecting anything to your computer, make sure the
power cord is plugged
in and the power is turned off. The power cord
acts as a ground for your computer, protecting you from electrical shock,
even when the computer is turned off.
▲
1. Plug the Y-shaped cable into the Apple IIe port on the
computer’s back panel, as shown in the figure.
The Y-shaped cable comes with the other Apple IIe Card materials.
Be sure the connectors line up correctly. Tighten the connector
screws to ensure a proper fit.
Connecting
other devices
Chapter 1: Preparing the Equipment 20