Xerox WorkCentre M165-M175-3093 - Manual (Page 75)

Quick Reference Guide Page 4-27
Co
py
To use Build Job, split the job into programming and scanning segments. Select the
Build Job option and select On. Program and scan the first segment. Continue to
program and load segments until the whole job has been scanned. When the entire
job has been scanned, select Build Job Controls and select End Build Job. The job
is processed and printed as a single job.
Options:
Off The feature is switched off.
On Use to enable the Build Job feature.
Build Job
Controls
Provides options which can be selected when using Build Job.
Build Job Controls options are as follows:
E ND B UILD J OB
Select this option after the last segment of the job has been
scanned. The job will be sent to print.
S AMPLE L AST
S EGMENT
Select to see a proof of the last segment scanned.
D ELETE L AST
S EGMENT
Use to delete the last segment scanned.
C ANCEL S AMPLE
P RINTING
Use to stop and cancel the sample segment that is currently
printing.
D ELETE A LL
SEGMENTS
Use to delete the current job and return to the main Build Job
screen.