Edge erase, Options, Edge erase -16 – Xerox WorkCentre M165-M175-3093 User Manual
Page 64
Page 4-16
Quick Reference Guide
Binding Erase
Erases a specified area from the centre of the book to eliminate unwanted marks
caused by scanning the binding. When Left Page or Right Page is selected,
between 0 and 1.0 inch can be erased. When Both Pages is selected, between 0
and 2.0 inches can be erased.
Edge Erase
Use this feature to “refresh” the quality of an original that has become torn or frayed
at the edges, or that has hole punch, staple or other marks.
Options:
Border Erase
Erases equal amounts on all edges of the copies. Up to 2.0 inches in 0.05in.
increments can be erased.
Edge Erase
Use to erase a specific amount from a specific edge of the copy. Up to 2.0 inches
in 0.05in. increments can be erased from each edge.
Print to Edge
Use this option to print to the edge of the output stock.
NOTE: This option may reduce the ability of the system to clean itself and can
cause defects on the output if used excessively.