Xerox WorkCentre M165-M175-3093 - Manual (Page 53)

Quick Reference Guide Page 4-5
Co
py
Stapling The Stapling options are as follows:
Collated and uncollated stapled sets will be delivered offset.
L Staples 2 - 50 sheets of 20lb, substance 20 paper. The maximum number of
sheets is 20 when stapling heavyweight paper.
Off-line
Stapling
This function is also available on all 3 finishers. Instructions for each finisher are as
follows:
L Staples 2 - 40 sheets of 20lb, substance 20 paper. The maximum number of
sheets is 20 when stapling heavyweight paper.
N O S TAPLES
The output will not be stapled.
S INGLE S TAPLE
Use this option to add a single staple to your output.
D OUBLE S TAPLE
Use this option to add 2 staples to your output.
M ULTI -S TAPLE
Use this option to add 3 or 4 staples to your output, depending on
the size of the paper being used. Multiple staples can be added to
the Left or Right side of your output.
This option is only available on the Advanced Office Finisher
and the Professional Finisher.
O FFICE F INISHER
Press and release the button on the top of the finisher. The green
light will illuminate, if the light is flashing the stapler is unavailable.
The Output Tray lowers to provide access to the stapler and bin 1.
Hold your documents and place them into bin 1, for extra support
move the rear bin 1 guide to the edge of your documents.
Slide the documents forward until you hear the click of the staple
being inserted to the front corner of the documents.
A DVANCED O FFICE
F INISHER AND
P ROFESSIONAL
F INISHER
Press and release the button on the top of the finisher. The green
light will illuminate, if the light is flashing the stapler is unavailable.
The Output Tray lowers to provide access to the stapler.
With your documents face down and the top to the front of the
machine, slide them into the stapler and towards the front of the
machine.
When you hear a click a single staple will be inserted in the top left
hand corner of your documents.