Xerox WorkCentre M165-M175-3093 - Manual (Page 70)

Page 4-22 Quick Reference Guide
Multi-Up
This feature is used to create documents with multiple images on each page. It is
ideal for creating handouts, storyboards or documents used for archival purposes.
NOTE: Originals must be loaded in the Document Handler when using this feature.
Options:
Off The feature is switched off.
On Use to enable the Multi-Up feature.
Multi-Up On options are as follows:
NOTE: The number of images will be limited by the minimum reduction value of
25% and the size of the selected output.
O RIENTATION
Use to select the image and load orientation of the input
originals.
R OWS
Selects the required number of Rows, between 1 and 6.
C OLUMNS
Selects the required number of Columns, between 1 and 6.