Xerox WorkCentre M165-M175-3093 - Manual (Page 56)

Page 4-8 Quick Reference Guide
Reduce/Enlarge
The Reduce / Enlarge option provides a variety of reduction and enlargement
options. Originals placed on the Document Glass or sent to the machine
electronically can be reduced or enlarged between 25% and 400%. Originals fed
through the Document Handler can be reduced or enlarged between 25% and
200%.
Options:
Normal Use this option to proportionately reduce or enlarge the output image in both
directions by the % selected.
Normal options are as follows:
Custom Use this option to adjust the height (Y) and the width (X) dimensions for reduction
or enlargement of each dimension independently.
NOTE: Output will NOT be reduced or enlarged proportionally.
100%
Produces an image on the copies the same size as the image on the
original.
A UTO %
Proportionally reduces or enlarges the image on the copies based
on the size of the original and the size of the selected output paper.
% S ET 25 - 200 / 400
Use this option to select the percentage of reduction or enlargement
required using the keypad on the control panel. To use the keypad,
select the box displaying the current reduce/enlarge percentage.
NOTE: 200% will be displayed when using the Document Handler
and 400% when using the Document Glass.
The scroll buttons can also be used to adjust the reduce/enlarge
percentage, in 1% increments.
P RESET O PTIONS
The most commonly used reduce/enlarge percentages have been
provided as preset options. These preset options can be
customi
z ed to meet individual needs.