Xerox WorkCentre M165-M175-3093 - Manual (Page 18)

Page 1-10 Quick Reference Guide
Laser Safety
This product complies with safety standards and is certified as a Class 1 Laser
product under the US Department of Health and Human Services (DHSS) Radiation
Performance Standard according to the Radiation Control for Health and Safety Act
of 1968. This product does not emit hazardous laser radiation.
CAUTION: Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous exposure of laser
light.
Since radiation emitted inside this product is completely confined within the
protective housing and external covers, the laser beam cannot escape from the
machine during any phase of the user operation.
The Center for Devices and Radiological Health (CDRH) of the US Food and Drug
Administration implemented regulations for laser products on August 1 1976. These
regulations apply to laser products marketed in the United States.The label on the
machine indicates compliance with CDRH regulations and must be attached to
laser products marketed in the United States.
This product contains laser warning labels. These labels are intended for use by
Xerox Service Representatives and are placed on or near panels or shields that
require special tools for removal. Do not remove any of the panels. There are no
operator serviceable areas inside these covers.
Safety Standards
This Xerox product is safety certified by Underwriters Laboratories Incorporated.
Standard UL1950/CSA 22.2 No.950 3rd EDITION.