Xerox WorkCentre M165-M175-3093 - Manual (Page 102)

Page 5-22 Quick Reference Guide
Build Job
Use this feature to build a job that requires different settings for each page. For
example, if a set of documents consists of some pages with text and some with
photos, the appropriate setting for each original can be applied and the job can still
be completed as a single job. This feature is also useful if your fax job has more than
70 pages, which exceeds the maximum capacity of the Document Handler.
To use Build Job, split the job into programming and scanning segments. Select the
Build Job option and select On. Program and scan the first segment. Continue to
program and load segments until the whole job has been scanned. When the entire
job has been scanned, select Build Job Controls and select End Build Job. The job
is processed and transmitted as a single job.
NOTE: The destination fax number must be entered prior to using Build Job.
Options:
Off The feature is switched off.
On Use to enable the Build Job feature.