Xerox WorkCentre M165-M175-3093 - Manual (Page 69)

Quick Reference Guide Page 4-21
Co
py
Booklet Creation
Use this feature to create multipage booklets from a sequential set of either single-
sided or double-sided originals. The machine produces 2 sided output
automatically, which when folded produces a booklet with all the pages in the
correct location. The machine will also reduce and correctly position each image to
fit on the selected paper.
NOTE: Your originals should be loaded Long Edge Feed (LEF) in the Document
Handler with the output paper loaded Short Edge Feed (SEF) in the paper tray.
Options:
Off The feature is switched off.
On Use this option to enable the Booklet Creation feature. Booklet Creation On options
are as follows:
A cover can be inserted onto the booklet automatically by selecting the Covers
option from the Output Format tab. Refer to page 4-24 for more information.
If your machine is fitted with the Professional Finisher, you can use the booklet
maker feature to fold and if required, staple (saddle stitch) your booklet output. For
more information, refer to “Output” on page 4-4.
1 S IDED O RIGINALS
Select this option if the originals are single-sided.
2 S IDED O RIGINALS
Select this option if the originals are double-sided.