Xerox WorkCentre M165-M175-3093 - Manual (Page 27)

Quick Reference Guide Page 2-3
Product Overview
CopyCentre C165/175
The following options are available for the CopyCentre.
Offset Catch
Tray
Delivers output either face up or face down, collated or uncollated. Each set or stack
will be offset from the previous to enable easy separation. Fitted instead of a
finisher.
Finisher There are 3 finishers available: the Office Finisher, Advanced Office Finisher and
the Professional Finisher. All finishers deliver output to the Top Tray by default
when scanning from the document glass, or to the Stacker to collate, stack, staple
and, if available, hole punch your chosen output. In addition a walk-up off-line
stapler is also available.The Professional Finisher can also fold and staple output to
produce booklets.
Your chosen finisher is fitted instead of the Offset Catch Tray.
Hole Punch This option is available if your machine is equipped with any of the three finishers.
The kits available are 2 hole or 3 hole long edge feed or 2 hole short edge feed for
legal size paper. Each sheet is punched individually, so there is no limit to the
number of sheets in the set. Additional Hole Punch kits can be purchased as an
option.
Document Handler Document Glass
(under the Document
Handler)
Control Panel
(Touch Screen and
Numeric Keypad)
Offsetting
Catch Tray
Paper Trays 1 & 2
Bypass Tray
(Folds up when
not in use)
Paper Trays 3 & 4
(High Capacity
Feeder)