Xerox WorkCentre M165-M175-3093 - Manual (Page 177)

Quick Reference Guide Page 10-3
Maintenance
Staple Cartridges
If your machine is equipped with one of the 3 finishers you will be required to replace
the staple cartridge or cartridges when the machine displays a message instructing
you to do so.
The Office Finisher, Advanced Office Finisher and Professional Finisher all contain
a main staple cartridge which holds 5,000 staples. The Professional Finisher has 2
additional staple cartridges located within the Booklet Maker, each of these
cartridges contains a maximum of 2000 staples.
To replace a staple cartridge, follow the instructions on the User Interface or refer
to the Maintenance section of the Training and Information CD (CD2), contained in
the CD Pack delivered with your machine.
HINT: To place an order for any Xerox consumables, please contact your local
Xerox Representative giving your Company Name, product number and the
machine serial number.
CAUTION: When replacing consumables, DO NOT remove the covers or
guards that are fastened with screws. You cannot maintain or service any of
the parts that are behind these covers and guards. Do NOT attempt any
maintenance procedure that is NOT specifically described in the
documentation supplied with your machine.