Konica Minolta bizhub 4750 - Manual (Page 64)

[Applied Functions] 1-58
1.5 Available operations in Administrator mode 1
[TCP Socket Settings]
To display: Administrator mode - [Network] - [TCP Socket Settings] - [TCP Socket Settings]
Configure the TCP Socket operating environment.
[Proxy] Configure a setting for the required proxy server if you want associate this ma-
chine with a different system that supports OpenAPI.
[Proxy Server Ad-
dress] Enter the proxy server address.
Use one of the following formats.
•
Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[Proxy Server Port
Number (HTTP)] If necessary, change the proxy server port number for HTTP.
[8080] is specified by default.
[Proxy Server Port
Number (HTTPS)] If necessary, change the proxy server port number for HTTPS.
[8080] is specified by default.
[Proxy Server Port
Number (FTP)] If necessary, change the proxy server port number for FTP.
[21] is specified by default.
[Proxy Server User
Name] Enter the user name to log in to the proxy server (using ASCII characters of up
to 63 bytes).
[Proxy Server Pass-
word] Enter the password (using ASCII characters of up to 63 bytes).
To enter (change) the password, select the [Change Password] check box,
then enter a new password.
[Specified Application
Start Setting] Configure settings for starting the OpenAPI application if you are using an
OpenAPI application.
[Specified Applica-
tion] Select whether or not to launch only the pre-specified OpenAPI application
when this machine has started up.
[Disable] is specified by default.
Note
When the OpenAPI application is selected in [Default Application Selection],
the setting can be changed.
[Default Application
Selection] When you use this function, specify the OpenAPI application to be launched.
[None] is selected by default.
[Basic Functions
Setting] When using this function, select whether or not to use the basic functions of
this machine.
[Restrict] is specified by default.
Item Description
Settings Description
[TCP Socket] Select whether or not to use TCP Socket on this machine.
[Enable] is specified by default.
[Port Number] If necessary, change the TCP Socket port number.
[59158] is specified by default.
[SSL/TLS] Select whether or not to use SSL for a communication via TCP Socket.
This setting is available when the certification of this machine is registered.
[Non-SSL Only] is specified by default.
Note
When [Security] - [PKI Settings] - [SSL/TLS Settings] - [SSL/TLS] is set to [En-
able], the setting can be changed.
[Port Number
(SSL/TLS)] If necessary, change the SSL communication port number.
[59159] is specified by default.