Konica Minolta bizhub 4750 - Manual (Page 144)

[Applied Functions] 6-6
6.2 Operations required to use this function (for Administrators) 6
3
In [Function selection], select [Authentication Settings] - [User authentication settings], and then click
[Add].
4
Select a user template, and click [OK].
% For details on templates, refer to the relevant Data Administrator manual.
The User Registration screen appears.
5
Enter the user name and password, and select the [IC card authentication] tab.
6
Place the IC card on the authentication unit, then click [Start reading].
% You can also register the card by directly entering the card ID.
7
Click [OK], and register authentication information of the next user.
8
After the registration of authentication information has been completed for all users, click [Export to the
device].
% When necessary, select a user name, and click [Edit] to change registered information.
9
Click [Write].
% Data Administrator supports the batch copy function. If necessary, you can collectively write the
registered authentication information to multiple devices.
10
When writing to this machine has finished, click [OK].
11
Disconnect the authentication unit from the computer's USB port.
NOTICE
When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be dam-
aged or a failure may occur.