Konica Minolta bizhub 4750 - Manual (Page 20)

[Applied Functions] 1-14
1.5 Available operations in Administrator mode 1
[ROM Version]
To display: Administrator mode - [System] - [ROM Version] - [ROM Version]
Enables you to check the ROM version of this machine.
[Unit of Measure] Select a system of units that are normally used.
The default value depends on the region the machine is used in.
[Sleep Mode Time] Change the time required to automatically change to Sleep mode after you did
not operate this machine.
The default value depends on the region the machine is used in.
[Low Power Time] Change the time period before the machine status is automatically changed to
Low Power mode if it is not used for the specified length of time.
The default value depends on the region the machine is used in.
[Entering Power Save
Mode] When this machine receives a print job from a fax machine or computer in
Power Save mode, select the timing to switch to Power Save mode after the
print job has completed.
•
[Normal]: Switches the machine status at the time specified in [Low Power
Time] or [Sleep Mode Time].
• [Immediately]: Switches to Power Save mode immediately after a print job
has ended.
[Immediately] is specified by default.
[Power Consumption in
Sleep Mode] Select whether or not to reduce the power consumption in Sleep mode.
•
[Enable]: Further reduces power consumption in Sleep mode. Select [Ena-
ble] in normal conditions.
• [Disable]: Select this option if a smooth network communication is not es-
tablished while [Enable] is specified.
[Enable] is specified by default.
[Power Key Setting] Select whether to use the Power key on the Control Panel as a sub power
OFF key or as a power save key.
•
[Power Save]: Press the Power key briefly to shift to Power Save mode
(Low Power or Sleep mode). Hold down the Power key to turn the sub pow-
er off.
• [Sub Power Off]: Press the Power key briefly to turn the sub power off. If
the Power key is held down, Power Save mode shifts to ErP Auto Power
Off mode (near the status when the main power is turned off), which offers
a greater power saving effect than that in Sub Power Off mode.
The default value depends on the region the machine is used in.
[Power Save Setting] Select the type of power save mode when pressing the Power key on the Con-
trol Panel.
•
[Low Power]: Switches to Low Power mode. Turns off the Touch Panel
display to reduce power use.
• [Sleep]: Switches to Sleep mode. Sleep mode provides a greater power
saving effect than Low Power mode. However, the time required to return
to Normal mode is longer than the time required to recover from Low Power
mode.
[Low Power] is specified by default.
[Hide Personal Informa-
tion] Select whether or not to hide document names, in the [Job] tab.
[Off] is specified by default.
[PDF/A Setting] Select whether or not to enable PDF/A when a PDF file is saved.
[Off] is specified by default.
[ADF Skew Correction
Setting] Specify whether to adjust the inclination of the original when scanning the orig-
inal through the ADF.
•
[OFF]: Does not adjust the inclination of the original.
• [ON]: Adjusts the inclination of all originals.
• [Auto]: Adjusts the inclination only when the inclination of the original has
been detected.
[Auto] is specified by default.
Item Description