Konica Minolta bizhub 4750 - Manual (Page 126)

[Applied Functions] 4-2
4.1 Using LPR connection 4
4 Adding a Printer Using LPR/IPP Connection (Mac
OS Environment)
4.1 Using LPR connection
Operations required to use this function (for administrators)
Configure the LPR operating environment.
For details on how to configure the settings, refer to page 1-44.
In Mac OS X 10.4 and later
In Mac OS X 10.4 and later, use the following procedure to add a printer using an LPR connection:
1
Select [System Preferences...] in the Apple menu.
2
Click the [Network] icon.
3
The Ethernet setting window appears.
% In Mac OS X 10.5 and later, select [Ethernet], then click [Advanced...].
% In Mac OS X 10.4, select [Built-in Ethernet], then click [Configure...].
4
Click the [TCP/IP] tab.
5
Configure the settings including the IP address and subnet mask according to the settings of the net-
work to which the computer is connected.
6
Click the close button at the top left corner of the window.
% When the [Apply configuration changes] message appears, click [Apply].
Then, add the printer to the computer.
7
Select [System Preferences...] in the Apple menu.
8
Click the [Print & Fax] icon.
% In Mac OS X 10.7/10.8, click the [Print & Scan] icon. In Mac OS X 10.9, click the [Printer & Scanner]
icon.
9
Click [+] in the lower left of the screen.
% In Mac OS X 10.7/10.8/10.9, select [Add Other Printer or Scanner...] or [Add Printer or Scanner...] in
the list that is displayed by clicking [+].
10
Click [IP] or [IP Printer].
11
In [Protocol:], select [Line Printer Daemon - LPD].
12
In [Address:], enter the IP address for the machine.
The printer driver for the machine specified with the IP address is displayed in [Print Using:].