Konica Minolta bizhub 4750 - Manual (Page 21)

1.5 Available operations in Administrator mode 1
[Applied Functions] 1-15
[Maintenance] - [Clear Settings]
To display: Administrator mode - [System] - [Maintenance] - [Clear Settings]
Initializes the network settings and system settings.
[Maintenance] - [Reset]
To display: Administrator mode - [System] - [Maintenance] - [Reset]
Resets the controller.
[Notification Settings] - [Status Notification Settings]
To display: Administrator mode - [System] - [Notification Settings] - [Status Notification Settings]
If a warning, such as paper addition, toner replacement, or paper jam, occurs on this machine, it can be sent
to a registered E-mail address.
Item Description
[System Settings] Initializes the system settings.
When this option is selected, this machine restarts automatically.
[Network Settings] Initializes the network settings.
When this option is selected, this machine restarts automatically.
[All Settings] Initializes the all settings.
When this option is selected, this machine restarts automatically.
Item Description
[IP Address] Specify the destination IP address to send a notification of the machine status
using the SNMP TRAP function.
For details on how to specify the SNMP TRAP function, refer to page 1-52.
[Notification Ad-
dress] Enter the IP address (IPv4), IP address (IPv6), or host name.
[Port Number] If necessary, change the port number.
[162] is specified by default.
[Community Name] Enter the community name.
[public] is specified by default.
[E-mail Address] Specify the destination E-mail address to send the machine status via E-mail.
For details on the E-mail environment settings, refer to page 2-2.
[Notification Ad-
dress] Enter the E-mail address as a destination (using ASCII characters of up to 320
bytes).
[Alert] Select an item to be notified automatically.