Konica Minolta bizhub 4750 - Manual (Page 57)

1.5 Available operations in Administrator mode 1
[Applied Functions] 1-51
[IPP Settings]
To display: Administrator mode - [Network] - [IPP Settings] - [IPP Settings]
Configure the operating environment for IPP printing.
[FTP Settings] - [FTP Server Settings]
To display: Administrator mode - [Network] - [FTP Settings] - [FTP Server Settings]
To use application software with which the FTP server of this machine is used to communicate, configure the
FTP server.
[Port Number] If necessary, change the HTTP server port number.
[80] is specified by default.
[SSL/TLS] Select whether or not to use SSL for communication with the HTTP server.
[Disable] is specified by default.
[Port Number (SSL)] If necessary, change the SSL communication port number.
[443] is specified by default.
Item Description
Item Description
[IPP Print] Select whether or not to use IPP printing.
[Enable] is specified by default.
[Accept IPP Job] Select whether or not to enable reception of the IPP job.
[Enable] is specified by default.
[Printer Name] If necessary, enter a printer name of this machine (using up to 127 bytes).
[Printer Location] If necessary, enter the installation location of this machine (using up to 127
bytes).
[Printer Information] If necessary, enter the printer information of this machine (using up to 127
bytes).
[Printer URI] Displays the URI of the printers that can print data using the IPP.
[Operational Support] Select whether or not to allow the following IPP operations.
•
[Print Job]: Allows a print job.
• [Validate Job]: Allows you to check a valid job.
• [Cancel Job]: Allows you to cancel a job.
• [Get Job Attributes]: Allows you to obtain job attributes.
• [Get Jobs]: Allows you to obtain a list of job attributes.
• [Get Print Attributes]: Allows you to obtain printer attributes.
[ON] (selected) is specified by default in every case.
[IPP Authentication] Select the IPP authentication method.
[Requesting-user-name] is specified by default.
[User Name] Enter the user name (using ASCII characters of up to 20 bytes, excluding a co-
lon (:)).
This entry is required if you have selected [Basic] or [Digest] in [IPP Authenti-
cation].
[Password] Enter the password (using ASCII characters of up to 20 bytes).
To enter (change) the password, select the [Change Password] check box,
then enter a new password.
This entry is required if you have selected [Basic] or [Digest] in [IPP Authenti-
cation].
[Realm] Enter the domain (realm) (using ASCII characters of up to 127 bytes).
This entry is required if you have selected [Digest] in [IPP Authentication].
Item Description
[FTP Server] Select whether or not to use the FTP server function of this machine.
[Enable] is specified by default.
[Port Number] If necessary, change the FTP server port number.
[21] is specified by default.